For more than 80 years, the International Association of Plumbing and Mechanical Officials (IAPMO) has been protecting the public’s health and safety. With the proper codes in place, communities can effectively protect their residents by ensuring clean water supplies and properly installed cooling and heating systems.

IAPMO utilizes an open consensus process in the development of their flagship Uniform Plumbing Code and Uniform Mechanical Code. These codes are established through scientific research, debate, and analysis, strengthening our position at the forefront of the plumbing and mechanical industries.

For the first time ever, professionals can access up-to-date Uniform Plumbing and Mechanical Codes along with state and International custom codes through the citation dynamic interface that makes management of change effortless.

Search codes, regulations and referenced standards on-line
Subscribe to additional standards through other on-line providers
Always have the most current, pertinent information. Obtain automatic updates to changes in standards and regulations across industry categories
Compare documents quickly and easily. IAPMO's Codes portal includes the tools to help you immediately identify additions, deletions, and modifications to every document
Add annotations, pictures, links, and share your findings
Email your research to specific team members

IAPMO Codes Web Portal Includes:

2009 Mechanical Codes

Preface
Chapter 1 - Administration
Chapter 2 - Definitions
Chapter 3 - General Requirements
Chapter 4 - Ventilation Air Supply
Chapter 5 - Exhaust Systems
Chapter 6 - Duct Systems
Chapter 7 - Combustion Air
Chapter 8 - Chimneys and Vents
Chapter 9 - Installation of Specific Equipment
Chapter 10 - Steam and Hot Water Boilers
Chapter 11 - Refrigeration
Chapter 12 - Hydronics
Chapter 13 - Fuel Gas Piping
Chapter 14 - Process Piping
Chapter 15 - Solar Systems
Chapter 16 - Stationary Power Plants
Chapter 17 - Standards
Appendix A - Uniform Mechanical Code Standard No. 2-2 Standard for Galvanized Sheet Metals
Appendix A - Uniform Mechanical Code Standard 6-2 Standard for Metal Ducts
Appendix A - Uniform Mechanical Code Standard 6-5 Standard for Installation of Factory-Made Air Ducts
Appendix B - Procedures to be followed to place Gas Equipment in Operation
Appendix C - Installation and Testing of Oil (Liquid) Fuel-Fired Equipment
Appendix D - Unit Conversion Tables
Index

2009 Plumbing Codes

Preface
Chapter 1 - Administration
Chapter 2 - Definitions
Chapter 3 - General Regulations
Chapter 4 - Plumbing Fixtures and Fixture Fittings
Chapter 5 - Water Heaters
Chapter 6 - Water Supply and Distribution
Chapter 7 - Sanitary Drainage
Chapter 8 - Indirect Wastes
Chapter 9 - Vents
Chapter 10 - Traps and Interceptors
Chapter 11 - Storm Drainage
Chapter 13 - Health Care Facilities and Medical Gas and Vacuum Systems
Chapter 14 - Referenced Standards
Chapter 15 - Firestop Protection
Chapter 16 - Nonpotable Water Reuse Systems
Appendix A - Recommended Rules for Sizing the Water Supply System
Appendix B - Explanatory Notes on Combination Waste and Vent Systems
Appendix D - Sizing Storm Water Drainage Systems
Appendix E - Manufactured/Mobile Home Parks and Recreational Vehicle Parks
Appendix F - Firefighter Breathing Air Replenishment Systems
Appendix I - Installation Standards
Appendix K - Private Sewage Disposal Systems
Appendix L - Alternate Plumbing Systems

Appendix IS - Installation Standards

IS 1-2006 - Installation Standard for Installation Standard for Non-Metallic Building Sewers
IS 2-2006 - Installation Standard for Tile-Lined Roman Bath Tubs
IS 3-2006 - Installation Standard for Copper Plumbing Tube‚ Pipe‚ and Fittings
IS 4-2006 - Installation Standard for Tile-Lined Shower Receptors (and Replacements)
IS 5-2006 - Installation Standard for Abs Building Drain‚ Waste‚ and Vent Pipe and Fittings
IS 6-2006 - Installation Standard for Hubless Cast Iron Sanitary and Rainwater Systems
IS 7-2008 - Installation Standard for Polyethylene (Pe) Cold Water Building Supply and Yard Piping
IS 8-2006 - Installation Standard for Pvc Cold Water Building Supply and Yard Piping
IS 9-2006 - Installation Standard for Pvc Building Drain‚ Waste and Vent Pipe and Fittings
IS 11-2006 - Installation Standard for ABS Sewer Pipe and Fittings
IS 12-2006 - Installation Standard for Polyethylene (Pe) for Gas Yard Piping
IS 13-2006 - Installation Standard for Protectively Coated Pipe
IS 15-2006 - Installation Standard for Asbestos Cement Pressure Pipe for Water Service and Yard Piping
IS 18-2006 - Installation Standard for Extra Strength Vitrified Clay Pipe in Building Drains
IS 20-2006 - Installation Standard for CPVC Solvent Cemented Hot and Cold Water Distribution Systems
IS 21-2006 - Installation Standard for Welded Copper and Copper Alloy Water Tube
IS 26-2006 - Installation Standard for Trench Less Insertion of Polyethylene (Pe) Pipe for Sewer Laterals
IS 27-2003 - Installation Standard for Odor Control Systems for Water Closets
IS 28-2005 - Installation Standard for Composite Pex-Al-Pex Hot and Pe-Al-Pe Cold Water-Distribution Systems
SIS 1-2003 - Installation Standard for Flexible PVC Hose
SIS 2-2003 - Installation Standard for Assembled Whirlpool Bath Appliances

Useful Tables
Index

2007 California Mechanical Code

Preface
Chapter 1 - California General Code Provisions
Chapter 2 - Definitions
Chapter 3 - General Requirements
Chapter 4 - Ventilation Air Supply
Chapter 5 - Exhaust Systems
Chapter 6 - Duct Systems
Chapter 7 - Combustion Air
Chapter 8 - Chimneys and Vents
Chapter 9 - Special Fuel-Burning and Energy-Utilizing Equipment
Chapter 10 - Steam and Hot Water Boilers
Chapter 11 - Refrigeration
Chapter 12 - Hydronics
Chapter 13 - Fuel Gas Piping
Chapter 14 - Process Piping
Chapter 15 - Solar Systems
Chapter 16 - Stationary Fuel Cell Power Plants
Chapter 17 - Standards
Appendix Chapter 1 - Administration
Appendix A - Uniform Mechanical Code Standard No. 2-2 Standard for Galvanized Sheet Metals
Appendix A - Uniform Mechanical Code Standard 6-2 Standard for Metal Ducts
Appendix A - Uniform Mechanical Code Standard 6-5 Standard for Installation of Factory-Made Air Ducts
Appendix B - Procedures to be followed to place Gas Equipment in Operation
Appendix C - Installation and Testing of Oil (Liquid) Fuel-Fired Equipment
Appendix D - Unit Conversion Tables
Index
History Note Appendix

2007 California Plumbing Code

Preface
Chapter 1 - General Code Provisions
Chapter 2 - Definitions
Chapter 3 - General Regulations
Chapter 4 - Plumbing Fixtures and Fixture Fittings
Chapter 5 - Exhaust Systems
Chapter 6 - Water Supply and Distribution
Chapter 7 - Sanitary Drainage
Chapter 8 - Indirect Wastes
Chapter 9 - Vents
Chapter 10 - Traps and Interceptors
Chapter 11 - Storm Drainage
Chapter 13 - Health Care Facilities and Medical Gas and Vacuum Systems
Chapter 14 - Mandatory Referenced Standards
Chapter 15 - Firestop Protection
Chapter 16 - Gray Water Systems
Appendix Chapter 1 - Administration
Appendix A - Recommended Rules for Sizing the Water Supply System
Appendix B - Explanatory Notes on Combination Waste and Vent Systems
Appendix D - Sizing Storm Water Drainage Systems
Appendix E - Manufactured/Mobile Home Parks and Recreational Vehicle Parks
Appendix F - Firefighter Breathing Air Replenishment Systems
Appendix G - Graywater Systems
Appendix K - Private Sewage Disposal Systems
Appendix L - Alternate Plumbing Systems
History Note Appendix

Appendix IS - Installation Standards

IS 1-2003 - Installation Standard for Installation Standard for Non-Metallic Building Sewers
IS 2-2003 - Installation Standard for Tile-Lined Roman Bath Tubs
IS 3-2003 - Installation Standard for Copper Plumbing Tube‚ Pipe‚ and Fittings
IS 4-2003 - Installation Standard for Tile-Lined Shower Receptors (and Replacements)
IS 5-2003 - Installation Standard for Abs Building Drain‚ Waste‚ and Vent Pipe and Fittings
IS 6-2003 - Installation Standard for Hubless Cast Iron Sanitary and Rainwater Systems
IS 7-2003 - Installation Standard for Polyethylene (Pe) Cold Water Building Supply and Yard Piping
IS 8-2003 - Installation Standard for Pvc Cold Water Building Supply and Yard Piping
IS 9-2003 - Installation Standard for Pvc Building Drain‚ Waste and Vent Pipe and Fittings
IS 11-2003 - Installation Standard for Abs Sewer Pipe and Fittings
IS 12-2003 - Installation Standard for Polyethylene (Pe) for Gas Yard Piping
IS 13-2003 - Installation Standard for Protectively Coated Pipe
IS 15-2003 - Installation Standard for Asbestos Cement Pressure Pipe for Water Service and Yard Piping
IS 18-2003 - Installation Standard for Extra Strength Vitrified Clay Pipe in Building Drains
IS 20-2005 - Installation Standard for Cpvc Solvent Cemented Hot and Cold Water Distribution Systems
IS 21 -2003 - Installation Standard for Welded Copper and Copper Alloy Water Tube
IS 26-2003 - Installation Standard for Trench Less Insertion of Polyethylene (Pe) Pipe for Sewer Laterals
IS 27-2003 - Installation Standard for Odor Control Systems for Water Closets
IS 28-2005 - Installation Standard for Composite Pex-Al-Pex Hot and Pe-Al-Pe Cold Water-Distribution Systems

Index
Useful Tables

2007 India Plumbing Code

Chapter 1 - Administration
Chapter 2 - Definitions
Chapter 3 - General Regulations
Chapter 4 - Plumbing Fixtures and Fixture Fittings

2006 Uniform Mechanical Code

Preface
Chapter 1 - Administration
Chapter 2 - Definitions
Chapter 3 - General Requirements
Chapter 4 - Ventilation Air Supply
Chapter 5 - Exhaust Systems
Chapter 6 - Duct Systems
Chapter 7 - Combustion Air
Chapter 8 - Chimneys and Vents
Chapter 9 - Installation of Specific Equipment
Chapter 10 - Steam and Hot Water Boilers
Chapter 11 - Refrigeration
Chapter 12 - Hydronics
Chapter 13 - Fuel Gas Piping
Chapter 14 - Process Piping
Chapter 15 - Solar Systems
Chapter 16 - Stationary Fuel Cell Power Plants
Chapter 17 - Standards
Appendix A - Uniform Mechanical Code Standard No. 2-2 Standard for Galvanized Sheet Metals
Appendix A - Uniform Mechanical Code Standard No. 6-5 Standard for Installation of Factory-Made Air Ducts
Appendix B - Procedures to be Followed to Place Gas Equipment in Operation
Appendix C - Installation and Testing of Oil (Liquid) Fuel-Fired Equipment
Appendix D - Unit Conversion Tables
Index

2006 Uniform Plumbing Code

Chapter 1 - Administration
Chapter 2 - Definitions
Chapter 3 - General Regulations
Chapter 4 - Plumbing Fixtures and Fixture Fittings
Chapter 5 - Water Heaters
Chapter 6 - Water Supply and Distribution
Chapter 7 - Sanitary Drainage
Chapter 8 - Indirect Wastes
Chapter 9 - Vents
Chapter 10 - Traps and Interceptors
Chapter 11 - Storm Drainage
Chapter 12 - Fuel Piping
Chapter 13 - Health Care Facilities and Medical Gas and Vacuum Systems
Chapter 14 - Mandatory Referenced Standards
Chapter 15 - Firestop Protection
Chapter 16 - Gray Water Systems
Appendix A - Recommended Rules for Sizing the Water Supply System
Appendix B - Explanatory Notes on Combination Waste and Vent Systems
Appendix D - Sizing Storm Water Drainage Systems
Appendix E - Manufactured/Mobile Home Parks and Recreational Vehicle Parks
Appendix F - Firefighter Breathing Air Replenishment Systems
Appendix I - Installation Standards
Appendix K - Private Sewage Disposal Systems
Appendix L - Alternate Plumbing Systems

Appendix IS - Installation Standards

IS 1-2003 - Installation Standard for Non-Metallic Building Sewers
IS 2-2003 - Installation Standard for Tile-Lined Roman Bath Tubs
IS 3-2003 - Installation Standard for Copper Plumbing Tube‚ Pipe‚ and Fittings
IS 4-2003 - Installation Standard for Tile-Lined Shower Receptors (and Replacements)
IS 5-2003 - Installation Standard for ABS Building Drain‚ Waste‚ and Vent Pipe and Fittings
IS 6-2003 - Installation Standard for Hubless Cast Iron Sanitary and Rainwater Systems
IS 7-2003 - Installation Standard for Polyethylene (Pe) Cold Water Building Supply and Yard Piping
IS 8-2003 - Installation Standard for PVC Cold Water Building Supply and Yard Piping
IS 9-2003 - Installation Standard for PVC Building Drain‚ Waste and Vent Pipe and Fittings
IS 11-2003 - Installation Standard for ABS Sewer Pipe and Fittings
IS 12-2003 - Installation Standard for Polyethylene (Pe) for Gas Yard Piping
IS 13-2003 - Installation Standard for Protectively Coated Pipe
IS 15-2003 - Installation Standard for Asbestos Cement Pressure Pipe for Water Service and Yard Piping
IS 18-2003 - Installation Standard for Extra Strength Vitrified Clay Pipe in Building Drains
IS 20-2005 - Installation Standard for CPVC Solvent Cemented Hot and Cold Water Distribution Systems
IS 21-2003 - Installation Standard for Welded Copper and Copper Alloy Water Tube
IS 26-2003 - Installation Standard for Trenchless Insertion of Polyethylene (Pe) Pipe for Sewer Laterals
IS 27-2003 - Installation Standard for Odor Control Systems for Water Closets
IS 28-2005 - Installation Standard for Composite Pex-Al-Pex Hot and Pe-Al-Pe Cold Water-Distribution Systems
SIS 1-2003 - Installation Standard for Flexible PVC Hose
SIS 2-2003 - Installation Standard for Assembled Whirlpool Bath Appliances

2003 Uniform Mechanical Code

Preface
Chapter 1 - Administration
Chapter 2 - Definitions
Chapter 3 - General Requirements
Chapter 4 - Ventilation Air Supply
Chapter 5 - Exhaust Systems
Chapter 6 - Duct Systems
Chapter 7 - Combustion Air
Chapter 8 - Chimneys and Vents
Chapter 9 - Installation of Specific Equipment
Chapter 10 - Steam and Hot Water Boilers
Chapter 11 - Refrigeration
Chapter 12 - Hydronics
Chapter 13 - Fuel Gas Piping
Chapter 14 - Process Piping
Chapter 15 - Solar Systems
Chapter 16 - Stationary Fuel Cell Power Plants
Chapter 17 - Standards
Appendix A - Uniform Mechanical Code Standard No. 2-2 Standard for Galvanized Sheet Metals
Appendix A - Uniform Mechanical Code Standard No. 6-2 Standard for Metal Ducts
Appendix A - Uniform Mechanical Code Standard No. 6-5 Standard for Installation of Factory-Made Air Ducts
Appendix B - Procedures to be Followed to Place Gas Equipment in Operation
Appendix C - Installation and Testing of Oil (Liquid) Fuel-Fired Equipment
Appendix D - Unit Conversion Tables
Index

2003 Uniform Plumbing Code

Preface
Chapter 1 - Administration
Chapter 2 - Definitions
Chapter 3 - General Regulations
Chapter 4 - Plumbing Fixtures and Fixture Fittings
Chapter 5 - Water Heaters
Chapter 6 - Water Supply and Distribution
Chapter 7 - Sanitary Drainage
Chapter 8 - Indirect Wastes
Chapter 9 - Vents
Chapter 10 - Traps and Interceptors
Chapter 11 - Storm Drainage
Chapter 12 - Fuel Piping
Chapter 13 - Health Care Facilities and Medical Gas and Vacuum Systems
Chapter 14 - Mandatory Referenced Standards
Chapter 15 - Firestop Protection
Appendix A - Recommended Rules for Sizing the Water Supply System
Appendix B - Explanatory Notes on Combination Waste and Vent Systems
Appendix D - Sizing Storm Water Drainage Systems
Appendix E - Manufactured/Mobile Home Parks and Recreational Vehicle Parks
Appendix G - Gray Water Systems for Single-Family Dwellings
Appendix H - Recommended Procedures for Design‚ Construction‚ and Installation of Commercial Kitchen Grease Interceptors
Appendix J - Reclaimed Water Systems for Non-Residential Buildings
Appendix K - Private Sewage Disposal Systems
Appendix L - Alternate Plumbing Systems

Appendix IS - Installation Standards

IS 1-2003 - Installation Standard for Non-Metallic Building Sewers
IS 2-2003 - Installation Standard for Tile-Lined Roman Bath Tubs
IS 3-2003 - Installation Standard for Copper Plumbing Tube‚ Pipe‚ and Fittings
IS 4-2003 - Installation Standard for Tile-Lined Shower Receptors (and Replacements)
IS 5-2003 - Installation Standard for ABS Building Drain‚ Waste‚ and Vent Pipe and Fittings
IS 6-2003 - Installation Standard for Hubless Cast Iron Sanitary and Rainwater Systems
IS 7-2003 - Installation Standard for Polyethylene (Pe) Cold Water Building Supply and Yard Piping
IS 8-2003 - Installation Standard for PVC Cold Water Building Supply and Yard Piping
IS 9-2003 - Installation Standard for PVC Building Drain‚ Waste and Vent Pipe and Fittings
IS 11-2003 - Installation Standard for ABS Sewer Pipe and Fittings
IS 12-2003 - Installation Standard for Polyethylene (Pe) for Gas Yard Piping
IS 13-2003 - Installation Standard for Protectively Coated Pipe
IS 15-2003 - Installation Standard for Asbestos Cement Pressure Pipe for Water Service and Yard Piping
IS 16-2003 - Installation Standard for Low-Pressure Air Test for Building Sewers
IS 18-2003 - Installation Standard for Extra Strength Vitrified Clay Pipe in Building Drains
IS 20-2005 - Installation Standard for CPVC Solvent Cemented Hot and Cold Water Distribution Systems
IS 21-2003 - Installation Standard for Welded Copper and Copper Alloy Water Tube
IS 26-2003 - Installation Standard for Trenchless Insertion of Polyethylene (Pe) Pipe for Sewer Laterals
IS 27-2003 - Installation Standard for Odor Control Systems for Water Closets
IS 28-2005 - Installation Standard for Composite Pex-Al-Pex Hot and Pe-Al-Pe Cold Water-Distribution Systems

Useful Tables
Index

Web-based Document Management Solutions

2009 Mechanical Codes

2009 Plumbing Codes

2007 California Mechanical Code

2007 California Plumbing Code

2007 India Plumbing Code

2006 Uniform Mechanical Code

2006 Uniform Plumbing Code

2003 Uniform Mechanical Code

2003 Uniform Plumbing Code